ANTIK用于需要防水的大理石、花岗岩等石材表面，令石面显出一种古董色彩。它能防潮、防油腻及污渍，并使石面光滑如缎。ANTIK尤其适用于喷沙、酸处理、石锥、火烧后的石面，亦可用于刷成面、磨刀面及抛光面，使表面色泽更佳。

  使用方法：使用前必须令表面完全干燥。对火烧面、沙喷面或粗锯石面可涂两层。第一层涂后约一小时再涂第二层。对磨刀面、抛家面则只需涂一层、不宜过多，也可以由用户决定涂一层或两层。如想避免石面的缎质色泽，只需在首次使用本品后24小时内用浸润ANTIK的抹布研磨石面，即可去除多余涂料以减少光亮度。用抹布或纸擦干材料。

  ROTECTIVE，ENHANCER AND ANTIQUELOOK “QNTIK”

  ANTIK is used on marble, granite and stone as water repellent and it gives “antique look” to the material Besides giving a remarkable “wet look” to the stone, it protects it against humidity, grease and oil stains ANTIK gives a nice satin look to the stone.Vert good on land-blasted, acid treated, bush-hammered or flamed finished stone and it can also be used on bushed, honed and polished surfaces to enhance the stone colour.

  INSTRUCTION FOR USE:

  The surface to be treated must be completely dry. apply the product twice on flamed, bush-hammered, land blasted or rough sawn material; one coat first and the second coating after one hour. On honed and polished material, apply once making sure not to put too much. the end-user will decide whether to apply one or two coatings. avoid the satin glossy look just by rubbing the surface with a cloth soaked with ANTID within 24hours form the original application, this way the excess will be removed this the surface will be less glossy. Dry the material using cloth or paper.